Dataentry
Wrt160n V3 Firmware 3003 Download
The wrt160n v3 & the E1000 v1 are identical in regards to hardware. As most know, Linksys has disabled the jtag circuit in these routers by leaving out smt components (just like the 610 v2 & E3000) I'll link this in another thread where a dd-wrt member needs jtag for this router. How do I upgrade the firmware of the Linksys WRT160N? To upgrade the firmware of your router, you need to download the software from the website and load it to the router’s web-based setup page. For instructions on how to upgrade your firmware, click here. I have a modem router and a Linksys WRT160N. Hi, I need to turn my Linksys WRT160N (Firmware Version: v3.0.01) into a wireless network repeater. Here is the setup: The Verizon access point is the main wireless provider to all devices in the house. I need to connect the Linksys wirelessly to that and have it act as another access point.
Wrt160n Firmware
- Device Type:
- WiFi Router
- Brand:
- Linksys
- Model:
- WRT160N
- Version:
- v3
- Availability:
- Discontinued
- Supported Since Rel:
- 15.05
- Supported Current Rel:
- 17.01.7
- Image too big:
- 18.06.0
- Unsupported Functions:
- WiFi 2.4GHz partly
- Gluon support:
- unknown
- Target:
- brcm47xx
- Subtarget:
- mips74k
- Package architecture:
- mipsel_74kc
- Bootloader:
- CFE
- CPU:
- Broadcom BCM4716
- CPU Cores:
- 1
- CPU MHz:
- 300
- Flash MB:
- 4
- RAM MB:
- 32
- Ethernet 100M ports:
- 5
- Ethernet Gbit ports:
- -
- Switch:
- Broadcom BCM5325E
- VLAN:
- No
- Modem:
- -
- WLAN Hardware:
- Broadcom BCM4716
- WLAN 2.4GHz:
- b/g/n
- WLAN 5.0GHz:
- -
- WLAN driver:
- b43
- Detachable Antennas:
- -
- Bluetooth:
- ¿
- miniPCI ports:
- ¿
- USB ports:
- -
- SATA ports:
- -
- Serial:
- Yes
- Serial connection parameters:
- ¿
- JTAG:
- Yes
- LED count:
- ¿
- GPIOs:
- ¿
- Power Supply:
- 12 VDC, 0.5 A
- OpenVPN performance:
- ¿
- Wireguard performance:
- ¿
- Device Page:
- wrt160n
- WikiDevi URL:
- https://wikidevi.wi-cat.ru/Linksys_WRT160N_v3
- WikiDevi ID:
- Linksys_WRT160N_v3
- Firmware OpenWrt Install URL:
- http://downloads.openwrt.org/releases/17.01.7/targets/brcm47xx/mips74k/lede-17.01.7-brcm47xx-mips74k-linksys-wrt160n-v3-squashfs.bin
- Firmware OpenWrt Upgrade URL:
- http://downloads.openwrt.org/releases/17.01.7/targets/brcm47xx/mips74k/lede-17.01.7-brcm47xx-mips74k-linksys-wrt160n-v3-squashfs.bin
- Installation method(s):
- CFE web recovery, see devicepage
- Recovery method(s):
- CFE web recovery
- Picture: